Rubber dampers absorb vibrations before they reach the phone. Camera, screen and components remain intact — on asphalt, cobblestones and forest trails.
Phone ready to ride in 10 seconds
One screw — phone secured firmly and without play. You hop on and ride — no fighting with the mount.
One mount for every vehicle in your garage
Phones 4.7"–7", handlebars 22–35 mm. Bike, scooter, moped — one mount, zero compromise.
Your phone won't feel a single shock
Vibrations transmitted through the handlebars are the silent enemy of every smartphone – they blur photos, damage the camera’s optical stabilisation, and over time cause microcracks in the components. 3mk BikeGrip™ puts an end to this. Rubber dampers placed at the contact points between the phone and the mount absorb and dampen vibrations before they reach the device. This is a well-thought-out suspension system that protects the camera, screen and electronics on all surfaces – smooth asphalt, cobblestones, forest roots or gravel paths. The phone rests steadily and calmly in the mount, as if it were not moving at all. Use navigation, record your route, listen to music – confident that vibrations won’t affect your smartphone’s condition. Protection you don’t see, but which works every kilometre.
Phone ready to ride in 10 seconds
Complex clips, tight arms, systems requiring two hands and five minutes of patience - all of this kills the spontaneity of a ride. 3mk BikeGrip™ works differently. One move, one screw, ten seconds – and your phone is firmly seated with no play. Place your smartphone in the mount’s arms, tighten the screw and you’re off. The mechanism holds tight but also allows quick removal of the phone when you reach your destination. This solution is designed for real-life use – when you’re standing on the pavement with your bike between your legs and one free hand. BikeGrip™ doesn’t complicate things – it simplifies. You get on, ride and enjoy your ride. The mount just does its job.
One mount for every vehicle in your garage
City bike, mountain bike, gravel, electric scooter? You don’t need a separate mount for each. 3mk BikeGrip™ is a universal solution for handlebars with a diameter from 22 to 35 mm – practically every bike or scooter on the market. It fits smartphones from 4.7 to 7 inches, meaning compatibility with the vast majority of devices regardless of brand or model. One mount – dozens of combinations. Instead of buying a dedicated system every time you change phone or vehicle, you invest once and use it for years. BikeGrip™ adapts to your lifestyle, not the other way around.
Buy once. Use for many seasons.
Most bike mounts don’t survive even one season in good condition. They yellow in the sun, crack in the cold, break apart after a few rains. 3mk BikeGrip™ was built to prevent this. The design based on a combination of ABS and nylon is a conscious choice of materials proven in demanding conditions. ABS provides rigidity, impact resistance and thermal stability. Nylon adds flexibility and tensile strength so adjustment mechanisms remain precise even after hundreds of use cycles. The materials are UV-resistant – no yellowing, dulling or loss of colour. Rain, sweat, dust, mud – BikeGrip™ withstands it all with no visible signs of wear. Season after season it looks and works just as well as on day one.
Simple handlebar mounting – right the first time
The handlebar mounting system is based on a solid adjustable clamp that allows the mount to be fitted to tubes 22 to 35 mm in diameter. Installation requires no special tools – just the wrench included in the set. You tighten, set the angle, and you’re done. The mount sits firmly, does not twist, slide or loosen due to vibrations. The rubber lining inside the clamp protects the handlebar paint from scratches and additionally stabilises the structure. Once installed, BikeGrip™ becomes a permanent part of your bike – discreet, functional and always ready to use. Want to move it to another vehicle? Removal is just as quick and easy. No permanent modifications, no marks, zero hassle.
Stability you wouldn’t expect at this price
3mk BikeGrip™ combines premium stability with a price that doesn’t hurt. When the phone is mounted, it doesn’t wobble, bounce or shift. The screw mechanism presses the device evenly and rubber elements keep it perfectly positioned regardless of route conditions. It’s a mount where the phone sits as if glued, and you ride without constantly checking if it’s still in place. BikeGrip™ proves that good protection and reasonable price can go hand in hand.
Polish quality, road-tested
3mk BikeGrip™ is a product designed in Poland by a team specialising in protecting mobile devices. Every element of BikeGrip™ was tested for durability before going on sale – resistance to vibrations, mounting stability at different speeds, material behaviour at extreme temperatures and reaction to long-term UV exposure. It’s a product backed by engineering, quality control and the experience of a brand protecting millions of devices across Europe. By choosing BikeGrip™, you choose a simple, durable and honest solution. A mount that simply works. Season after season.
Login and Registration Form