Smart charger with a TFT screen that shows power, temperature, and runtime in real time. GaN 67 W = fast, safe charging without overheating. Three USB-C/USB-A ports charge laptop, phone, and accessories simultaneously. Full power, full control.
Parameters on TFT screenAdaptive power distributionFull protocol supportUniversal compatibility
Different devices, different ecosystems, one charger
TFT display – finally know what’s going on
How many times have you plugged your phone in to charge and wondered: is it really charging at full power? Do those 67W actually reach the laptop, or is that just a number in the specifications? Most chargers leave you with questions. They have at most an LED that says “working” or “not working”. End of information. Incharge® Lumin 67W™ changes that. The TFT display shows in real time everything you need to know: power on each port, total charging power, operating temperature, and uptime since being plugged in. You don’t guess – you check. This level of control should be standard but remains rare. For someone who takes gear seriously, it’s a fundamental difference.
You see how power delivery reacts to load changes. You see when thermal management starts to limit power. You see how the system balances energy between ports. This is not marketing – it is a dashboard with real electrical parameters. Finally, a charger that doesn’t cheat you.
67W power GaN – compact that does not throttle
Traditional 67W chargers are large, heavy and heat up like ovens. This is due to silicon transistors, which have limited conduction efficiency and generate substantial energy losses as heat. Result? You need a bigger enclosure, a bigger radiator, and in practice – a device that takes up half your backpack. Incharge® Lumin 67W™ uses GaN (gallium nitride) technology – a next-generation semiconductor that conducts energy faster and with less resistance than classic silicon. Smaller energy losses mean less heat emission, allowing a compact design without throttling.
In practice, you get 67W power in a housing smaller than a traditional 45W charger. Less weight, smaller size, lower operating temperature. Full power all the time, even under prolonged load.
Three ports, zero compromises
2× USB-C + 1× USB-A – charge your laptop, smartphone and accessories simultaneously without carrying three separate chargers. Intelligent power management automatically distributes energy between ports. You plug in your MacBook – it gets the full 67W. Add a smartphone – the system redistributes power, maintaining high efficiency for both devices. Plug headphones into the USB-A port – everything still runs smoothly. And the best part? You see it on the TFT screen.
Every watt, every port, every load change. You don’t wonder whether the system works properly – you just check.
Adaptive power distribution – the system knows what it’s doing
Typical multi-port chargers work on a rigid scheme: port 1 gives X watts, port 2 gives Y watts, end of discussion. Incharge® Lumin 67W™ works differently. An intelligent chipset analyses the power profile of each connected device and calculates the optimal energy distribution in real time. You plug in your laptop – it gets the full 67W. Add your phone – the system balances power so both charge with maximum efficiency. Laptop finishes charging – the system gives the freed-up power to the phone. Everything happens automatically, without your intervention.
And thanks to the TFT display you see how it works in practice. Every power redistribution – all visible on the screen.
Every protocol, every device
Fast charging is a whole ecosystem of protocols: USB Power Delivery 3.0 with dynamic voltage negotiation, Quick Charge 4+ (Qualcomm), PPS with precise voltage control for Samsung, SCP (Huawei high-voltage), AFC (Samsung), FCP (Honor). Most chargers support 2-3 protocols. Incharge® Lumin 67W™ supports all key standards – at the hardware level, with native support, no emulation.
iPhone charges via PD 3.0, Samsung via PPS, Huawei via SCP – every device gets its native protocol and maximum speed. You just plug in – and it works. And thanks to the TFT display you see exactly how many watts actually reach the device.
From iPhone to Steam Deck – all from one charger
iPhone, Samsung Galaxy, Huawei, Xiaomi – full support of native protocols. MacBook Pro/Air, Windows ultrabooks (Dell XPS, HP Spectre, Lenovo ThinkPad, ASUS ZenBook) – 67W over USB-C PD 3.0. Steam Deck, Nintendo Switch – handheld consoles get exactly the energy they need. Different devices, different ecosystems, different manufacturers – incharge® Lumin 67W™ supports everything.
Stop collecting chargers. Stop wondering which to pack for a trip. One charger, three ports, full compatibility.
Safety you can see
Most chargers have thermal protections – but they work in the background. You don’t know the temperature until the charger shuts off completely. Incharge® Lumin 67W™ shows the temperature on the TFT display in real time. You see how warm the charger is under load. You see how the temperature rises and how fast the system cools. Plus a full suite of hardware protections: OTP (Over-Temperature Protection), OCP (Over-Current Protection), OVP (Over-Voltage Protection), SCP (Short-Circuit Protection).
Everything works at the controller level with instant reaction time. But most importantly – you don’t have to believe it works. You see it on the screen.
Data instead of promises
Other chargers have an LED. It blinks – it works. It doesn’t blink – it doesn’t work. End of info. The rest is hidden inside the enclosure, in specifications, in manufacturer promises. Incharge® Lumin 67W™ doesn’t make you believe. It shows. The TFT display is a control tool. Power on each port, total power, temperature, uptime – all live, all transparent.
This is a charger for those who don’t take words for it – they check on the screen. Because data are not a whim. They are certainty.
Login and Registration Form