Smart charger with a TFT screen that shows power, temperature, and runtime in real time. GaN 67 W = fast, safe charging without overheating. Three USB-C/USB-A ports charge laptop, phone, and accessories simultaneously. Full power, full control.
Parameters on TFT screenAdaptive power distributionFull protocol supportUniversal compatibility
How many times have you plugged your phone in to charge and wondered: is it really charging at full power? Does that 67W actually go to the laptop, or is it just a number in the specs? Most chargers leave you with questions. At best, they have an LED light that says "working" or "not working." End of info. Incharge® Lumin 67W™ changes that. The TFT display shows in real time everything you need to know: power on each port, total charging power, operating temperature, and time since connection.
You don't guess - you check. This level of control should be standard but is still rare. For someone who takes their gear seriously, it's a fundamental difference. You see how power delivery reacts to load changes. You see when thermal management starts limiting power. You see how the system balances energy across ports. This is not marketing – this is a dashboard with real electrical parameters. Finally, a charger that doesn't deceive you.
67W GaN power – compact that doesn’t throttle
Traditional 67W chargers are large, heavy, and heat up like ovens. This is due to silicon transistors' limited conduction efficiency and the significant energy loss as heat. The result? You need larger casing, bigger heat sinks, and practically half a backpack for your device.
incharge® Lumin 67W™ uses GaN technology (gallium nitride) – a new generation semiconductor that conducts energy faster and with less resistance than classic silicon. Lower energy losses mean less heat generation, allowing a compact design without throttling. You get 67W power in a case smaller than a traditional 45W charger. Lower weight, smaller size, lower operating temperature. Full power all the time, even under sustained load.
Three ports, zero compromises
2× USB-C + 1× USB-A – charge your laptop, smartphone, and accessories simultaneously without carrying three separate chargers. Intelligent power management automatically allocates energy between ports. Plug in a MacBook – it gets full 67W. Add a smartphone – the system redistributes power, maintaining high efficiency for both devices.
You connect headphones to the USB-A port – everything still works smoothly. And the best part? You see it on the TFT screen. Every watt, every port, every load change. You don’t wonder if the system works properly – you just check.
Adaptive power distribution – the system knows what to do
Typical multi-port chargers operate on fixed schemes: port 1 gives X watts, port 2 gives Y watts, end of discussion. incharge® Lumin 67W™ works differently. An intelligent chipset analyses the power profile of each connected device and calculates optimal energy distribution in real time. You plug in a laptop – it gets full 67W. Add a phone – the system balances power so both charge with maximum efficiency.
The laptop finishes charging – the system reallocates free power to the phone. Everything happens automatically, without your intervention. And thanks to the TFT display, you see how it works in practice. Every power redistribution – all visible on the screen.
Every protocol, every device
Fast charging is an ecosystem of protocols: USB Power Delivery 3.0 with dynamic voltage negotiation, Quick Charge 4+ (Qualcomm), PPS with precise voltage control for Samsung, SCP (Huawei high-voltage), AFC (Samsung), FCP (Honor). Most chargers support 2-3 protocols. Incharge® Lumin 67W™ supports all major standards – on hardware level, with native support, no emulation.
iPhone charges via PD 3.0, Samsung via PPS, Huawei via SCP – each device gets its native protocol and maximum speed. Just plug in – it works. And thanks to the TFT display, you see how many watts actually go into the device.
From iPhone to Steam Deck – all from one charger
iPhone, Samsung Galaxy, Huawei, Xiaomi – full support of native protocols. MacBook Pro/Air, Windows ultrabooks (Dell XPS, HP Spectre, Lenovo ThinkPad, ASUS ZenBook) – 67W via USB-C PD 3.0. Steam Deck, Nintendo Switch – handheld consoles get exactly the energy they need.
Different devices, different ecosystems, different manufacturers – incharge® Lumin 67W™ supports it all. No more charger collection. No more wondering which one to pack for a trip. One charger, three ports, full compatibility.
Safety you can see
Most chargers have thermal protections – but they work hidden. You don’t know the temperature until the charger shuts off completely. incharge® Lumin 67W™ shows the temperature on the TFT screen in real time. You see how hot the charger is under load. You see the temperature rise and how fast the system cools down.
Plus, a full suite of hardware protections: OTP (Over-Temperature Protection), OCP (Over-Current Protection), OVP (Over-Voltage Protection), SCP (Short-Circuit Protection). Everything works at the controller level, with instant reaction time. But most importantly – you don’t have to trust that it works. You see it on the screen.
Data instead of promises
Other chargers have an LED. It blinks – works. Does not blink – doesn’t work. End of info. The rest is hidden behind the case, in specs, in manufacturer promises. Incharge® Lumin 67W™ doesn’t make you believe. It shows.
The TFT display is a control tool. Power on each port, total power, temperature, running time – all live, all transparent. This is a charger for those who don’t take words for granted – they check the screen. Because data is not a whim. It’s certainty.
Login and Registration Form